Which Joe gave his name to ‘sloppy joes’? We look at five interesting sandwiches and their lexical origins.
A machine for shaping wood, metal, or other material by means of a rotating drive that turns the piece being worked on against changeable cutting tools.
- ‘Veneer is made by placing a cut log on a giant lathe and then rotating it against a cutter.’
- ‘He built his own tools - lathes and presses - mixed his inks, shaped the spheres, and printed all of his own maps, probably relying on increasingly available atlases.’
- ‘He will turn wood on a lathe and tend the museum's medieval garden, which has plants for household, culinary and medicinal use.’
- ‘For example, around 1750 Antoine Thiout introduced the innovation of equipping a lathe with a screw drive.’
- ‘When Jonathan was 12, he started turning wood on a lathe.’
- ‘In addition to the belt-driven machines, there is an electric lathe and an electric drill press.’
- ‘High Schools of the day offered some pretty good metal working programs in classrooms outfitted with lathes, milling machines and shapers.’
- ‘Across the alley three men sat on the floor in an open room beside lathes and other machine shop equipment, each one busily manufacturing a gun.’
- ‘The lathe has a material feed mechanism and will turn out cases as long as it has rod to feed.’
- ‘In middle school, I also took wood shop and eventually became obsessed with the wood lathe.’
- ‘His huge wind-measuring instrument with its giant dials had a room of its own and there was another for his tools and lathes.’
- ‘After leaving school at 14, he worked in an engineering workshop where he learnt to use a metal lathe and other equipment.’
- ‘I take the bulk away with a wood lathe tool, take it down and smooth it out with clay tools, and buff it with a rubber pad.’
- ‘You notice the lathe and the other tools first, crafted down to each groove and handle.’
- ‘He had a workshop with a lathe and other tools, where he used to go to commune in spirit with the horny handed sons of toil.’
- ‘Other aluminum bearing applications are in heavy tooling, such as boring mills, presses, lathes, milling machines, and grinding mills, and as hydraulic pump bushings.’
- ‘A woodturner needs a lathe and some basic tools.’
- ‘Visitors were also shown vases that were cast from the same material and turned on a wood lathe.’
- ‘Industrial accidents, too, are common, especially to people using high-speed machinery such as grinders, drills, saws, lathes or milling machines without adequate eye protection.’
- ‘Since he was interested in tools, we showed him a simple lathe (a tool he had wished he could use) in a glass case at the Science Museum in London.’
Shape with a lathe.
- ‘The mandapa remained a square, though it was now distinguished by circular columns, the shafts of which had been lathed and thus acquired a number of parallel knife-edges.’
- ‘The place wasn't wealthy: the plates were rough lathed wood, grease from meals soaked into it.’
Middle English: probably from Old Danish lad structure, frame perhaps from Old Norse hlath pile, heap related to hlatha (see lade).
We take a look at several popular, though confusing, punctuation marks.
From Afghanistan to Zimbabwe, discover surprising and intriguing language facts from around the globe.
The definitions of ‘buddy’ and ‘bro’ in the OED have recently been revised. We explore their history and increase in popularity.